New product
Equipped with 2 gymnastic bars in 140 cm length and dip bars. On request also expandable with Human-Flag Bar, Climbing Net and Sling Trainer.
Stable construction, made entirely in V2A stainless steel.
Here you can not only do gymnastics, but also train at the dip bars . Well suited for a variety of training and play opportunities even in limited space, if you can do without a rung ladder.
A stretch rod is adjustable from 15 cm to 240 cm in 25 steps. The other stretch rod can be mounted on the two height measurements 235 and 215 cm at the corner installation, when installing the pull-up rods side by side, both rods are completely adjustable, so that a variety of Freeletics and Calisthenics exercises with your own body weight are possible.
So adults as well as children and adolescents quickly find suitable training conditions.
The quick adjustments are already included.
The post strength is at this cheap station already 3mm, a human flag pole is therefore inexpensive to complete.
The installation of the two gymnastic bars is possible as a corner solution or side by side.
Stable construction, made entirely in V2A stainless steel DIN 1.4301.
Our outdoor gym products are characterized by the use of high-quality material and a professionally executed and high-quality workmanship.
The material is completely machined, all welds are clean.
We provide a 10-year warranty on welds and rust-free.
Our products are characterized by the use of high-quality material as well as a professionally executed and high-quality workmanship. The material is completely machined, all welds are clean.
The dimensions of the vertical posts are 80 x 60 mm and a reinforced wall thickness of 3 mm.
Execution of the chin-up bar:
The attachment of the gymnastic bar as well as the adjustment of the height is done by means of two M12 star knob screws.
For this purpose, the turn bar has a CNC machined turned part at both ends, which is equipped with one M12 thread each. In addition, the two contact surfaces are provided with a knurl to the post to effectively prevent spinning of the rods.
The adjustment of the turntable height can thus be made without the use of tools.
In principle, the equipment can be installed at any installation site. The posts are secured in concrete foundations, which are approx. 60 cm deep. The stainless steel posts are cemented directly into the cement, the wooden posts in galvanized wooden post anchors.
The parallel, perpendicular and exact alignment of the posts is of huge importance for stable installation of the equipment. By using the M12 size threaded rods and the horizontal bars, the equipment can be exactly aligned before concreting. This way, the distance of the posts will be ensured with millimetre precision until the concrete hardens.
Lawn can be used for the floor, but fall-protection mats or sheets have better properties. These items are available from specialty stores in square or rectangular shapes and in different colours. In comparison to grass, these mats offer better protection against falls.
Principle sketch
Floor design with fall protection plates
Use of threaded rods
Technical specifications | at the top of the tab TECHNICAL DATA |
Dimensional sketch | at the top of this page at the pictures |
Product information as a PDF file | start PDF download |
360 ° round view | at the top of this page on the page product details as an animated product tour |
FAQ | at the page FAQ |
Shipping | on the site Shipping |
Required floor area including edge areas | 430 x 230 cm (side by side) ; 300 x 230 cm (corner installation) |
Number of pull-up bars | 2 bars |
Height of gymnastics bars | Gymnastic bars adjustable in 9 cm grid between 15 and 240 cm (optional 300) |
Post dimension and wall thickness | 80x60x3 mm |
Dip bars | with dip bars in length 150 cm, height 110 cm or 120 cm mountable, diameter 43 mm |
Ladder | without ladder |
Human-Flag bar | available with Human-Flag pole |
Place the gymnastic bar virtually and realistically in your garden.
Your family and friends will be amazed.
Also check the size directly at the planned location.
That's how it works
1. Download the AUGMENT app on your tablet or smartphone
2. Open the product on your mobile device and click the button
Open Dip Buin Duo
Thus, the station loads in the AUGMENT App.
Watch demo video
Packaging and shipping using the example of a TOLYMP Cross system
We are asked again and again how our equipment is packed and shipped. Here are a few photos that give a good impression.
Feedback to the Dip Buin Duo in the courtyard
A customer from Luxembourg has installed his slightly extended TOLYMP Dip Buin Duo system in the courtyard of his...
Stainless steel
Accessories
Miscellaneous
Wood-steel mix
Everything about development, production and use of TOLYMP products