TOLYMP Max

Quick adjustment of the gymnastics bars

The height is adjusted by means of two M12 star grip screws.
For this purpose, the turn bar has a CNC machined turned part at both ends, which is equipped with an M12 thread.
In addition, the two contact surfaces are provided with a knurl to the post to effectively prevent spinning of the rods.
Adjusting the height is thus very easy and is done in three steps:
1. Loosen the two screws by hand.
2. Fixing the gymnastics bar at the new desired height 
3. Screwing the turn bar through the two star grip screws 

Assembly and installation of the equipment

In principle, the equipment can be installed at any installation site. The posts are secured in concrete foundations, which are approx. 60 cm deep. The stainless steel posts are cemented directly into the cement, the wooden posts in galvanized wooden post anchors.

To ensure seamless installation, you will receive:

• All the required fixtures and fittings. The only thing missing is the ready-mixed concrete (sacks of concrete mix are available at hardware shops)
• Assembly instructions, incl. foundation plans and elevation sketches
• Threaded rods incl. screw connections for millimetre precision alignment of the equipment

Alignment using threaded rods

The parallel, perpendicular and exact alignment of the posts is of huge importance for stable installation of the equipment. By using the M12 size threaded rods and the horizontal bars, the equipment can be exactly aligned before concreting. This way, the distance of the posts will be ensured with millimetre precision until the concrete hardens.

Floor design

Lawn can be used for the floor, but fall-protection mats or sheets have better properties. These items are available from specialty stores in square or rectangular shapes and in different colours. In comparison to grass, these mats offer better protection against falls.