Included Items
Item no.: 4112
Extra-long post, 360 cm long with 9 hole grid on both sides, made of ground V2A stainless steel.
- Reinforced version with 80×60 mm cross section and 3 mm wall thickness
- Incl. 12,3 mm holes in a 9cm grid on the wide and narrow sides.
This ensures complete height adjustment of both poles when installed in a corner
Item no.: 4193
Landmine barbell holder for 50 mm diameter, for mounting on any TOLYMP post
- High-quality design, made from ground V2A stainless steel
- Optimal freedom of movement in all directions thanks to gimbal mounting
- Suitable for intensive landmine training, suitable for all standard barbells with a 50 mm shaft diameter
- Delivery includes mounting kit suitable for all 80×60 mm posts from TOLYMP
Item no.: 4165
Universal holder for attaching battle ropes etc. to any TOLYMP post
- High-quality design, made from ground V2A stainless steel
- Also suitable for attaching punching bags, rope ladders, climbing ropes, etc. to the horizontal bars of a hanging ladder
- Delivery includes quick adjustment and extensive fastening set with various screw lengths, suitable for all installation cases
Item no.: 1095
Cleanly processed and very pleasant to the touch and feel.
The set contains two rings and wide fastening straps with a buckle system for quick height adjustment
- Dimensions: Outer diameter 235 mm, inner diameter 172 mm, ring diameter 32 mm
- Strong and wide nylon fastening straps, length 450 cm
- Straps with printed length markings
- It can be attached flexibly to any gymnastics or multi-pull-up bar
Item no.: 4139
Very high quality, stable and durable design. Installation can be carried out flexibly on any vertical support post.
- Fully welded construction made of V2A stainless steel
- Easy height adjustment in 9 cm increments without tools
- Dimensions: Length of bars 49 cm, narrowest/largest width: 43 cm/65 cm
- Diameter: 40mm
Item no.: 3093
Extremely stable design in well-known TOLYMP quality. Suitable for attaching a punching bag, climbing rope, etc.
- 1 x ring nut M12 DIN 582 V4A
- 1 x snap hook 11 x 120 mm V4A
- 1x screw DIN 7380-2 M12x55 V2A
For mounting, e.g. on an inclined mounting element, item no. 4171 and inclined ladder 4171 are suitable
Item no.: 3063
Wall ball throwing target, for attaching battle ropes etc. to any TOLYMP post
- High-quality design, made from ground V2A stainless steel
- Also suitable for attaching punching bags, rope ladders, climbing ropes, etc. to the horizontal bars of a hanging ladder
- Delivery includes quick adjustment and extensive fastening set with various screw lengths, suitable for all installation cases
Item no.: 4133
Very stable holder for storing any standard barbell.
- High-quality design, made from ground V2A stainless steel
- Support arms made of hard plastic (screwable, therefore replaceable) to reduce rattling noises
- Attachment at any desired height to the narrow side (60 mm) of the support posts
- Incl. 2 pieces of M12 pan head screws and star grip nuts, for quick height adjustment without the use of tools
Item no.: 1229
For effective and varied strength and endurance training.
- Fully covered rope for long life and durability
- 38 mm diameter
- Attachment to TOLYMP Battlerope holder item no. 4165
- Also available in 12 and 15 meter lengths
Item no.: 1262
Professional gymnastics bar for attachment between two support posts.
- Length of the gymnastics bar 110 cm, diameter 33,7 mm
- High-quality design, made from ground V2A stainless steel
- Fastening using two welded retaining straps for guaranteed protection against twisting
- Incl. 4 pieces of M12 pan head screws, washers and star grip nuts, for quick height adjustment without the use of tools
Item no.: 1228
Pull-up balls to increase your grip strength and for new training incentives, including those known from Ninja Warriors.
- Grip balls diameter: 9,7 cm with a grip-friendly surface
- Includes stainless steel carabiner hooks and nylon fabric buckles for quick attachment to poles and hanging ladders
Item no.: 4171
Universal holder for mounting a punching bag, climbing rope, etc. on a support post.
- Made from polished V2A stainless steel
- Delivery incl. internal screw set; This means that gymnastics bars or a hanging ladder can be mounted at the same height
- Includes extra-long Allen key for easy installation
- Recommended for use with item no. 3093 – Carabiner with ring nut
Item no.: 1003
Vertical training bar for the supreme calisthenics discipline Human-Flag. Alternatively, it is also very popular with children as a fire brigade slide and climbing pole.
- Total length 240 cm for concreting into the ground (approx. 25 cm deep)
- Width 35 cm, diameter 43 mm
- High-quality design, made from ground V2A stainless steel
- Bent from a tube, so no annoying weld seams
- Attached to the post using a welded retaining strap
- Incl. 2 pieces of M10 pan-head screws and lock washers (can also be attached to any post using through-hole screws upon special request)
Item no.: 1235
Perfect for getting started with suspension training in conjunction with the TOLYMP outdoor systems.
Our inexpensive budget version of a sling trainer without having to forego long-lasting quality.
- Length adjustment for ease of use
- Carabiner solution for quick change of suspension solutions
- Handles made of foam rubber for good grip comfort and high durability
- Compensation loop for good training performance, even with one-armed exercises
