TOLYMP Cross Basic
A beginner station especially for outdoor fitnesstraining: Two chin-up bars, ladder, monkey bar and a barbell holder (accessory)
An outdoor gym with reduced equipment and focus on the essentials, yet versatile use. Various adjustment options and purposes. Later expandable and retrofitted at any time.
Stable, durable and maintenance-free design, made entirely of V2A stainless steel.
Our starter model TOLYMP Cross Basic, which can be extended at any time
- The Monkey bar is 100 cm wide and has 6 rungs, all individually adjustable.
Numerous extensions can be used here: sling trainer, straps, ropes, even a children's swing can be easily installed here (see photos). - The two pull-up bars can be adjusted in 25 steps from 15 cm to 240 cm.
- The vertical rung ladder also has 6 rungs, which you can mount individually in a 9cm pitch
- The dip bar can alternatively be delivered in a bar length (70 cm instead of 150 cm). The bar width can be freely defined during construction.
- The 3 meter high stretch bar in length 180 cm already has the new professional gymnastic bar with firmly welded tabs and larger wall thickness. This is very suitable, e.g. for attaching gymnastic rings.
- The illustrated barbell holder, however, is not included and is available as a product option.
Stable construction, made entirely in V2A stainless steel DIN 1.4301.
Our outdoor gym products are characterized by the use of high-quality material and a professionally executed and high-quality workmanship.
The material is completely machined, all welds are clean.
We provide a 10-year warranty on welds and rust-free.
The stainless steel components
Our products are characterized by the use of high-quality material as well as a professionally executed and high-quality workmanship. The material is completely machined, all welds are clean.
The dimensions of the vertical posts are 80 x 60 mm and a reinforced wall thickness of 3 mm.
Adjustment of the gymnastic bars
Execution of the chin-up bar
The attachment of the gymnastic bar as well as the adjustment of the height is done by means of two M12 star knob screws.
For this purpose, the turn bar has a CNC machined turned part at both ends, which is equipped with one M12 thread each. In addition, the two contact surfaces are provided with a knurl to the post to effectively prevent spinning of the rods.
The adjustment of the turntable height can thus be made without the use of tools.
Assembly and installation of the equipment
In principle, the equipment can be installed at any installation site. The posts are secured in concrete foundations, which are approx. 60 cm deep. The stainless steel posts are cemented directly into the cement, the wooden posts in galvanized wooden post anchors.
To ensure seamless installation, you will receive:
- All the required fixtures and fittings. The only thing missing is the ready-mixed concrete (sacks of concrete mix are available at hardware shops)
- Assembly instructions, incl. foundation plans and elevation sketches
- Threaded rods incl. screw connections for millimetre precision alignment of the equipment
Alignment using threaded rods
The parallel, perpendicular and exact alignment of the posts is of huge importance for stable installation of the equipment. By using the M12 size threaded rods and the horizontal bars, the equipment can be exactly aligned before concreting. This way, the distance of the posts will be ensured with millimetre precision until the concrete hardens.
Floor design
Lawn can be used for the floor, but fall-protection mats or sheets have better properties. These items are available from specialty stores in square or rectangular shapes and in different colours. In comparison to grass, these mats offer better protection against falls.
Principle sketch
Floor design with fall protection plates
Use of threaded rods
| Technical specifications | at the top of the tab TECHNICAL DATA |
| Dimensional sketch | at the top of this page at the pictures |
| Product information as a PDF file | start PDF-download |
| 360 ° round view |
at the top of this page |
| FAQ | at the page FAQ |
| Shipping | on the site Shipping |
| Required floor area including edge areas | 310 x 280 cm |
| Number of pull-up bars | 2 bars |
| Execution of gymnastics bars | made of polished V2A stainless steel, diameter 33.7 mm, wall thickness 2.5 mm, length 140 cm |
| Height of gymnastics bars | Gymnastic bars adjustable in 9 cm grid between 15 and 240 cm (optional 300) |
| Post dimension and wall thickness | 80x60x3 mm |
| Dip bars | without dip bars |
| Ladder | with ladder |
| Ladder dimensions | Width 100 cm, diameter 34 mm, consisting of 6 rungs individually adjustable |
| Human-Flag bar | available with Human-Flag pole |
| Burden | up to 150 kg per training element |
| Monkey-Bar | Width 100 cm, diameter 34 mm, length 220 cm, consisting of 6 rungs individually adjustable |
Per app in the garden
Place the gymnastic bar virtually and realistically in your garden.
Your family and friends will be amazed.
Also check the size directly at the planned location.
That's how it works
1. Download the AUGMENT app on your tablet or smartphone
2. Open the product on your mobile device and click the button
Open TOLYMP Cross Basic
Thus, the station loads in the AUGMENT App.
Watch demo video
Accessories
Related Products
Related articles
Super chic TOLYMP Cross system in the bamboo garden
This is how extraordinary a TOLYMP-Cross system can be set up in the garden. The pictures speak for themselves....
Packaging and shipping using the example of a TOLYMP Cross system
We are asked again and again how our equipment is packed and shipped. Here are a few photos that give a good impression.
Mum, Dad, and three boys training hard on the TOLYMP Cross
That’s just the way things should be: the entire family should be having fun working out and competing – and, by the...
Those products may also interest you
- Products
- Calisthenics
- Crosstraining
- Questions & Answers
-
about us
TOLYMP Video
- Blog
-
Service
Rückruf-Service
Planungs-Service
Sie wünschen eine individuell geplante Anlage? Wir setzen Ihre Ideen im 3D-CAD um.
zum Planungs-Service
Download-Service
Hier finden Sie Anleitungen, Prospekte etc. Stets aktuell und informativ.
zum Downloadbereich
Ersatzteil-Service
- Request a quote
English 
Deutsch 
Französisch