Pull-up bar Starterhorn

New product

Our smallest bar with 1 pull-up bar, suitable for children, adolescents and adults alike.

Very versatile gymnastics bar for outdoor use, suitable for children as well as for fitness and calisthenics exercises.
The stretching rod is 140 cm long and adjustable from 15 cm to 240 cm in 25 steps. Thus, adults as well as children and adolescents can easily find suitable training conditions.
The post thickness is 2mm, as a reinforced version also available in 3mm and with a fireman's pole / Human-Flag Bar.
Stable construction, made entirely in V2A stainless steel. Optionally available with the new professional gymnastics bar, in lengths of 140, 160 and 180 cm.

More details

€ 379,00

Weight: kg

Tax included
  • 2 mm (standard)
  • 3 mm (reinforced)
  • No human flag bar
  • With human flag bar
  • 1x M12 centrally mounted screw bolt (standard)
  • Pro-training bar, mounting brackets each with 2xM12 screws, length 140 cm
  • Pro-training bar, mounting brackets each with 2xM12 screws, length 160 cm
  • Pro-training bar, mounting brackets each with 2xM12 screws, length 180 cm
  • Non quick-release
  • With quick-release
Delivery time 10 days **

- +

 
More info

Classic and entry-level model - Gymnastic bar Starterhorn
Versatile and expandable at any time

A good basis for outdoor training in your own garden, where people of all ages and sizes will have their gymnastics success.
The chin-up bar can be adjusted to your liking in 24 steps from 15 cm to 240 cm.
The bar is optionally available with the new professional gymnastics bar with fixed welded tabs and thicker wall thickness.

Steelwood Starterhorn Edelstahl-Komponenten

The stainless steel components 

Our products are characterized by the use of high-quality material as well as a professionally executed and high-quality workmanship. The material is completely machined, all welds are clean.

The dimensions of the vertical posts are 80 x 60 mm and a reinforced wall thickness of 3 mm.


Installation and Adjustment of the Gym Bars

Standard version for normal gymnastics and pull-up activities

In the standard package the gym bars have a CNC-machined screw bit welded onto both ends, which are each equipped with an M12 thread.  In addition, the mounting plates on each post are provided with a knurled surface, that stops the bar from spinning.​

The gym bar is screwed from the outside with a central screw and thereby held reliably in place.​

This version is particularly suited for use as a pull-up bar.  In combination with the available optional quick-adjuster, rapid adjustment of the gym bar’s height is possible.​

Special Version for Maximum Loadingn

For an additional cost, a version is available with two welded mounts, whereby two M12 bolts hold the bar on each side.  Furthermore, the wall thickness of the bar is 3 mm, as opposed to 2.5 mm for the standard version.

With this, simultaneous turning of the bar during heavy loading, e.g. during swing exercises, is reliably avoided.​

The screws on here are provided with rounded heads, so that, on the inside of the gym bar, no risk of injury is presented by protruding screw heads.

The screws on the outside also have no sharp edges, achieved by using self-locking capping nuts.​


Adjustment of the gymnastic bars

In stainless steel with quick adjustments:
Attaching the horizontal bar, as well as adjusting the height, is done using two M12 star-shaped screws. For this reason, the horizontal bar has a CNC-milled turned part at both ends, which each have an M12 thread. In addition, the two contact surfaces are attached to the post with a knurl to effectively prevent the rods spinning.

Quick adjustment of the gymnastic bars

For the two fastening methods described above, we have developed a quick adjustment method for each of them, which are quite different to the assembly.​ Both methods are characterised by the ability to quickly adjust the height without the use of tools.​​

Standard version with an M12 central screw

The central screw has a massive star grip, which allows you to tighten the rod on each side.

Special version with welded latches

For this version, we supply 2 powerful star grip nuts for each side, which you can use to quickly tighten or loosen the two M12 screws.


Assembly and installation of the equipment

In principle, the equipment can be installed at any installation site. The posts are secured in concrete foundations, which are approx. 60 cm deep. The stainless steel posts are cemented directly into the cement, the wooden posts in galvanized wooden post anchors.

To ensure seamless installation, you will receive:

  • All the required fixtures and fittings. The only thing missing is the ready-mixed concrete (sacks of concrete mix are available at hardware shops)
  • Assembly instructions, incl. foundation plans and elevation sketches
  • Threaded rods incl. screw connections for millimetre precision alignment of the equipment

Alignment using threaded rods

The parallel, perpendicular and exact alignment of the posts is of huge importance for stable installation of the equipment. By using the M12 size threaded rods and the horizontal bars, the equipment can be exactly aligned before concreting. This way, the distance of the posts will be ensured with millimetre precision until the concrete hardens.

Floor design

Lawn can be used for the floor, but fall-protection mats or sheets have better properties. These items are available from specialty stores in square or rectangular shapes and in different colours. In comparison to grass, these mats offer better protection against falls. 
In addition, combining the mats with the wood-stainless steel products, will make the design of your play equipment very appealing.

Principle sketch

Floor design with fall protection plates

Steelwood Starterhorn Gewindestangen

Use of threaded rods

Further information

Technical specifications at the top of the tab TECHNICAL DATA
Dimensional sketch at the top of this page at the pictures
Product information as a PDF file start PDF-download
360 ° round view
at the top of this page
FAQ at the page FAQ
Shipping on the site Shipping

 
Data sheet
Required floor area including edge areas240 x 100 cm
Number of pull-up bars1 bars
Execution of gymnastics barsmade of polished V2A stainless steel, diameter 33.7 mm, wall thickness 2.5 mm, length 140 cm
Height of gymnastics barsGymnastic bars adjustable in 9 cm grid between 15 and 240 cm (optional 300)
Post dimension and wall thickness80 x 60 x 2 mm, optionally also in reinforced version 80 x 60 x 3 mm
Dip barswithout dip bars
Ladderwithout ladder
Human-Flag baravailable with Human-Flag pole
Burdenup to 150 kg per training element
 
Test live in 3D

Per app in the garden

Place the gymnastic bar virtually and realistically in your garden.
Your family and friends will be amazed.
Also check the size directly at the planned location.

That's how it works

1. Download the AUGMENT app on your tablet or smartphone

  

2. Open the product on your mobile device and click the button
  Open Pull-up bar Starterhorn

Thus, the station loads in the AUGMENT App.
Watch demo video

Product Options
   Quantity:   
 
Metal thickness
Metal thickness

The reinforced version has posts with wall thickness 3 mm.
This version is also installed on our large Calisthenics stations.
Necessary for extension with a Human-Flag pole.

2 mm (standard)
3 mm (reinforced)
Training bar fixtures
Training bar fixtures


Standard design for normal gymnastics and pull-up activities

The standard delivery package includes a welded M12 threaded insert on each side of the gymnastics bar.
This is bolted from the outside with a central screw and held reliably.
The gymnastics bar has a wall thickness of 2.5 mm.


Special design for maximum load
A version with two welded fastening straps is available at extra cost, with two M12 screws per side holding the rod. This reliably prevents turning of the rod even under heavy loads .
The screws are designed as Allen head screws so that there is no danger of injury from protruding parts on the inside of the gymnastics bar The turn bar has a wall thickness of 3.0 mm.
The screw connection on the outside also has no sharp edges and is done using self-locking cap nuts .

1x M12 centrally mounted screw bolt (standard)
Pro-training bar, mounting brackets each with 2xM12 screws, length 140 cm
Pro-training bar, mounting brackets each with 2xM12 screws, length 160 cm
Pro-training bar, mounting brackets each with 2xM12 screws, length 180 cm
Quick-release type
Quick-release type

For both types of attachment described above, we have each developed a quick adjustment.
You can use it to quickly adjust the height of the rod without tools.

Standard version with M12 central screw
The central screw has a solid star grip , which you can use to open the bar tighten each side.


Special design with welded tabs
In this version, we deliver 2 strong star grip nuts on each side with which you can quickly fix or loosen the two M12 screws.

Non quick-release
With quick-release
Human flag bar and/or sliding pole
Human flag bar and/or sliding pole

Human-Flag pole (or fireman\'s pole): Sturdy design in diameter 43mm, usable length 215 cm (+ 60 cm foundation).
Already contains the reinforced post profile in wall thickness 3mm.

No human flag bar
With human flag bar
   Quantity:   

Related articles

Stainless steel dual setup with pro training bars in a family setting

Double gym bar Zugschwitze, equipped with sturdy professional gymnastic bars and quick adjustment. Our customer also...

Kind words from a customer about his delivery of workout bars

From Greifswald we received the following message. The customer is also active in online trading, so we are even more...

The ten best Advanced Bodyweight exercises with training bars

Personal trainer Klaus Wolfsberger shows some bodyweight exercises at our training bars.

Mouseover Zoom loading...

Menu